InDashPC.org Forum Index InDashPC.org
In Dash Car PC forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

need pinout of the 8 pin din

 
Post new topic   Reply to topic    InDashPC.org Forum Index -> Car integration
View previous topic :: View next topic  
Author Message
siaug183
Newbie


Joined: 12 Jan 2006
Posts: 5

PostPosted: Thu Jan 12, 2006 5:40 am    Post subject: need pinout of the 8 pin din Reply with quote

hi, just got the usb-mbus converter but will not fit in my hu (jvc), so i have found the pinout for my jvc (j-link) connector but now would like to find the pinout of the 8 pin din.

any help would be great .......
Back to top
View user's profile Send private message Send e-mail
jbors
Site Admin


Joined: 12 Nov 2004
Posts: 1675

PostPosted: Thu Jan 12, 2006 8:44 am    Post subject: Reply with quote

Hmm, sorry I thought it is on a site. It looks not Sad
Here you go:
Back to top
View user's profile Send private message
siaug183
Newbie


Joined: 12 Jan 2006
Posts: 5

PostPosted: Sat Jan 14, 2006 1:05 am    Post subject: Reply with quote

cheers.. will get going on the cable converter now !

i do hope this works .... Confused
Back to top
View user's profile Send private message Send e-mail
siaug183
Newbie


Joined: 12 Jan 2006
Posts: 5

PostPosted: Sat Jan 14, 2006 4:02 am    Post subject: Reply with quote

damn !!!!! it does not work....

got it wired up but no response ....... the laptop does not even find any new hardware ....

maybe a power problem....

nd the pin out for the jvc is:

1. CONT---------- +12V when HU is on, 0V when HU is off
2. SCK ----------- This line the clock, clock is only there when data is transmitted. Otherwise it is low.
3. SI/SO --------- Dataline, seems to be bi-directional, low when no data is transmitted
4. GND ----------- Ground
5. +12V ---------- Well its +12V
6. CH-R ----------- Audio for right channel
7. A-GND --------- Analog ground, but is same as the rest of the GND's
8. CH-L ----------- Audio for left channel

dunno my be jvc does not use m-bus
Back to top
View user's profile Send private message Send e-mail
jbors
Site Admin


Joined: 12 Nov 2004
Posts: 1675

PostPosted: Sat Jan 14, 2006 10:57 am    Post subject: Reply with quote

I think JVC is not MBus compatible. It has 2 lines for signals whereas MBus is only 1 line.
Back to top
View user's profile Send private message
siaug183
Newbie


Joined: 12 Jan 2006
Posts: 5

PostPosted: Sat Jan 14, 2006 11:45 am    Post subject: Reply with quote

damn i think you are right ..... one line goes high when data is being transmitted and goes low when no data is be transmitted.

any ideas ?
Back to top
View user's profile Send private message Send e-mail
jbors
Site Admin


Joined: 12 Nov 2004
Posts: 1675

PostPosted: Sat Jan 14, 2006 1:57 pm    Post subject: Reply with quote

Not sure what can be done. JVC just is not compatible Sad
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    InDashPC.org Forum Index -> Car integration All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group