| View previous topic :: View next topic |
| Author |
Message |
rok
Newbie
Joined: 09 Feb 2005
Posts: 10
|
 Posted: Mon Mar 28, 2005 4:47 am Post subject: pycar-1.3.iso touchscreen |
 |
|
Hi,
I tested the iso file an it turns out that is quite fast and stable but
i've a problem with my touchscreen (lilliput):
TS will accept my input (touch) but not at the right position.
First i thought it was xy position problem but it isn't.
As i'm not familiar with DirectFB i'm not sure whether eGalax driver
is loading at all.
This is the output after running pycar:
| Code: |
---------------------- DirectFB v0.9.21 ---------------------
(c) 2000-2002 convergence integrated media GmbH
(c) 2002-2004 convergence GmbH
-----------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2005-01-26 20:02)
(*) Direct/Memcpy: Using linux kernel memcpy()
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 100)...
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 101)...
(!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [reactor.c:802]
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 102)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: VIA/S3G UniChrome 0.4 (-)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
(*) Direct/Interface: Loaded 'PNG' implementation of 'IDirectFBImageProvider'.
(*) Direct/Interface: Loaded 'FT2' implementation of 'IDirectFBFont'.
|
Do you have any idea as to what else i could try or some tools to help me test further.
tnx
Rok
_________________
--
I am only here to amuse myself. Anyone else is a bonus. |
|
| Back to top |
|
 |
jbors
Site Admin
Joined: 12 Nov 2004
Posts: 1675
|
| Posted: Mon Mar 28, 2005 8:25 am Post subject: |
|
|
Try out Settings->General->Calibrate Input menu choice.
It has a way to calibrate a screen. You have to restart PyCar after that( not the distro but program ). |
|
| Back to top |
|
|
rok
Newbie
Joined: 09 Feb 2005
Posts: 10
|
| Posted: Mon Mar 28, 2005 9:10 am Post subject: calibration |
|
|
tnx for quick answer...
ok i try to calibrate and i found that the upper right corner and lower left corner are switched.
upper left and lower right corners are ok...
How can i make the screen to switch the corners? 
And where the setting are saved?
tnx
Rok
_________________
--
I am only here to amuse myself. Anyone else is a bonus. |
|
| Back to top |
|
|
jbors
Site Admin
Joined: 12 Nov 2004
Posts: 1675
|
| Posted: Mon Mar 28, 2005 10:47 am Post subject: |
|
|
| What you mean switched, can you explain ? |
|
| Back to top |
|
|
rok
Newbie
Joined: 09 Feb 2005
Posts: 10
|
| Posted: Mon Mar 28, 2005 11:10 am Post subject: touchscreen coordinates |
|
|
hi again
what i am trying to say is that the coordinates for the upper right-hand corner and the lower left-hand corners are switched. in practice, this means that i have to touch the upper right-hand corner to press the button which is otherwise positioned in the lower left-hand corner, and vice-versa.
so if the Play button was positioned in the lower left of the screen, i would have to click (touch) the diagonally opposite corner to activate it.
tnx
rok
_________________
--
I am only here to amuse myself. Anyone else is a bonus. |
|
| Back to top |
|
|
jbors
Site Admin
Joined: 12 Nov 2004
Posts: 1675
|
| Posted: Mon Mar 28, 2005 11:18 am Post subject: |
|
|
Can you let me know what VID PID your egalax adapter has ?
On mine it has switched Y, on your it may be X.... |
|
| Back to top |
|
|
rok
Newbie
Joined: 09 Feb 2005
Posts: 10
|
| Posted: Mon Mar 28, 2005 11:38 am Post subject: Touchscreen VID PID |
|
|
this is the output of /proc/bus/usb/devices:
Vendor=0eef ProdID=0001 Rev=1.00
Manufacturer=eGalax Inc.
Is this the correct info?
Rok
_________________
--
I am only here to amuse myself. Anyone else is a bonus. |
|
| Back to top |
|
|
jbors
Site Admin
Joined: 12 Nov 2004
Posts: 1675
|
| Posted: Tue Mar 29, 2005 4:15 pm Post subject: |
|
|
| I'm looking into it. Will get back shortly. |
|
| Back to top |
|
|
jbors
Site Admin
Joined: 12 Nov 2004
Posts: 1675
|
| Posted: Wed Mar 30, 2005 10:35 pm Post subject: |
|
|
| Nothing. I have the same vid/pid. Really weird. I'll try to poke some other guys with Lilli to see if they have the same thing... Will keep you posted. |
|
| Back to top |
|
|
jbors
Site Admin
Joined: 12 Nov 2004
Posts: 1675
|
|
| Back to top |
|
|
rok
Newbie
Joined: 09 Feb 2005
Posts: 10
|
| Posted: Sat Apr 02, 2005 3:37 am Post subject: Touchscreen working.... |
|
|
Hi,
YEEEAAAHHH !!!! It's working... 
tnx tnx and tnx again !!!
Rok
_________________
--
I am only here to amuse myself. Anyone else is a bonus. |
|
| Back to top |
|
|
rok
Newbie
Joined: 09 Feb 2005
Posts: 10
|
| Posted: Mon Apr 04, 2005 9:17 am Post subject: movie section |
|
|
Hi,
When i play anything (avi-xvid,divx,dvd-mpeg2)...
the picture and sound jerking.
I've got 512Mb ram - test with cache settings 420, 160 itd...
but always the same story...
Testing on: on 1.3 and 1.3.0.1 iso
Anyone has the same problem?
Rok
_________________
--
I am only here to amuse myself. Anyone else is a bonus. |
|
| Back to top |
|
|
jbors
Site Admin
Joined: 12 Nov 2004
Posts: 1675
|
| Posted: Mon Apr 04, 2005 10:33 am Post subject: |
|
|
Try to see if DMA is turned on for a device from which you're playing movies. MPEG2 may not play correctly atm as I it needs to be done in HW indeed.
Which configuration are you seeing the problem on ? |
|
| Back to top |
|
|
barb3tta
Newbie
Joined: 02 Feb 2005
Posts: 30
|
| Posted: Mon Apr 04, 2005 11:03 am Post subject: |
|
|
Hi!
I've tried pycar 1.3 (not flipped) iso with my epia M9000 and my newision/lilliput 7" LCD /w TS, but the monitor is out of sync. Dunno why!
Maybe the "video" kernel parameter works only with your mobo?
Should I use "vga=0x314" instead?
TIA
barb3tta |
|
| Back to top |
|
|
jbors
Site Admin
Joined: 12 Nov 2004
Posts: 1675
|
| Posted: Mon Apr 04, 2005 11:23 am Post subject: |
|
|
I saw that updating to a latest bios and switching over to CRT output only may cure the problem.
PyCar uses regular 800x600x75 which works fine on most monitors.
I tested mine with M10000, M6000 with CRT, LCD and TV. Everything works fine. Try it out with TV or regular CRT. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
